A place to where I can record my Technical stuff that should be accessible from anywhere. It is mainly technical stuff I find interesting and I suppose it can be looked on as a modern Lab-book.
Friday, 5 August 2016
Makerbot on OS X Stuck in Fullscreen Mode!
I have had trouble with OS X El Capitan Version 10.11.6 and Makerbot Version 3.9.1.1143. Once you have entered fullscreen on Makerbot you will not be able to go back to the windowed version using any of the standard key combinations like esc and the ctrl + cmd + F key , it will just plain not work. To fix this from the terminal , first create a copy of /Users/your_username/.config/MakerBot/MakerWare.ini something like MakerWare.ini.orig , then edit the MakerWare.ini file using vim and look for the WindowGeometry="..........." entry. If you remove the data after the = including the quotes " and replace it with default ( it should look like this WindowGeometry=default). Then save it , when you start Makerbot it should start back in windowed mode - hooray!!! I took ages to find out how to fix this , even forums acknowledged it was a problem but gave no solution , the fix worked , go me!
Subscribe to:
Post Comments (Atom)
Defender 300tdi Lucas 10AS Alarm Immobiliser (Spider) Problems
We have a 1997 Landrover Defender 300tdi that has given immobiliser problems intermittently. I had initially fixed the fuel solenoid as we w...
-
Server failure This server failed with the error "E171F PCIE Fatal Err B0 D3 F0" during power up. Upon inspection it was found th...
-
I bricked my MR3220 router with an OpenWRT firmware upload. I did manage to get it back by soldering a 4 pin header on its pcb to allow conn...
-
I make no guarantees for the information contained herein, I also cannot be held responsible for data loss as a result of your actions, we m...
THANK YOU SO MUCH! GAH that was annoying.
ReplyDelete