Tuesday, 3 April 2012
OpenWRT and the TP Link WR841N
The WR841N has no USB port on the case but USB is available on the PCB if you can solder and don't mind a bit of work to get it going. I had a problem getting the USB connection I made to the WR841N PCB working. I tried various flavours of patched firmware with no success, however on the OpenWRT Forum someone mentioned just use the TP Link MR3420 firmware. This I did and it worked straight away, smiles all round.
I then got extroot to a 2GB memory stick working, this allowed me to add more packages. I added a USB hub to allow the connection of a USB webcam.
Subscribe to:
Post Comments (Atom)
Defender 300tdi Lucas 10AS Alarm Immobiliser (Spider) Problems
We have a 1997 Landrover Defender 300tdi that has given immobiliser problems intermittently. I had initially fixed the fuel solenoid as we w...
-
Server failure This server failed with the error "E171F PCIE Fatal Err B0 D3 F0" during power up. Upon inspection it was found th... -
I bricked my MR3220 router with an OpenWRT firmware upload. I did manage to get it back by soldering a 4 pin header on its pcb to allow conn... -
I make no guarantees for the information contained herein, I also cannot be held responsible for data loss as a result of your actions, we m...
No comments:
Post a Comment