After just over a year of use (just out of warranty) the fridge stopped keeping things cool.
After taking out the 7 screws from the back panel the power supply PCB was revealed.
On close examination it was found that the two 1000uF 25Volt electrolytic Capacitors on the power supply board were swollen (see picture below and note the pressure seals on the capacitors, both are leaking electrolyte), they were replaced and the fridge began to cool again, Result!
Do these repairs at your own risk, electricity is dangerous, you have been warned.
A place to where I can record my Technical stuff that should be accessible from anywhere. It is mainly technical stuff I find interesting and I suppose it can be looked on as a modern Lab-book.
Subscribe to:
Post Comments (Atom)
Defender 300tdi Lucas 10AS Alarm Immobiliser (Spider) Problems
We have a 1997 Landrover Defender 300tdi that has given immobiliser problems intermittently. I had initially fixed the fuel solenoid as we w...
-
Server failure This server failed with the error "E171F PCIE Fatal Err B0 D3 F0" during power up. Upon inspection it was found th...
-
I bricked my MR3220 router with an OpenWRT firmware upload. I did manage to get it back by soldering a 4 pin header on its pcb to allow conn...
-
I make no guarantees for the information contained herein, I also cannot be held responsible for data loss as a result of your actions, we m...
No comments:
Post a Comment