NFS not working
The nodes were not working and issuing the command
showed that there was an NFS mounting problem
jimp@compute-2:~$ rpcinfo -p
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 52121 status
100024 1 tcp 59769 status
The /etc/hosts file was changed to match the other nodes
the rpcinfo command now gives the following.
jimp@compute-5:~$ rpcinfo -p hadoop
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 56797 status
100024 1 tcp 54606 status
100021 1 udp 53628 nlockmgr
100021 3 udp 53628 nlockmgr
100021 4 udp 53628 nlockmgr
100021 1 tcp 53694 nlockmgr
100021 3 tcp 53694 nlockmgr
100021 4 tcp 53694 nlockmgr
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 1 udp 40126 mountd
100005 1 tcp 37582 mountd
100005 2 udp 40126 mountd
100005 2 tcp 37582 mountd
100005 3 udp 40126 mountd
100005 3 tcp 37582 mountd
Subscribe to:
Post Comments (Atom)
Defender 300tdi Lucas 10AS Alarm Immobiliser (Spider) Problems
We have a 1997 Landrover Defender 300tdi that has given immobiliser problems intermittently. I had initially fixed the fuel solenoid as we w...
-
Server failure This server failed with the error "E171F PCIE Fatal Err B0 D3 F0" during power up. Upon inspection it was found th... -
I bricked my MR3220 router with an OpenWRT firmware upload. I did manage to get it back by soldering a 4 pin header on its pcb to allow conn... -
I make no guarantees for the information contained herein, I also cannot be held responsible for data loss as a result of your actions, we m...
No comments:
Post a Comment