WakeonLAN
I have been working with the wakeonlan command and it does not work with the command eg wakeonlan 00:30:48:70:45:8c.
I have however got it to work with wakeonlan -i 192.168.1.255 00:30:48:70:45:8c by
using the broadcast address for the private network the node is on.
I have tried it a good number of times and it is consistently switching on the compute-4 node.
I think the main problem was to do with the wakeonlan command not knowing where to send the magic packet either on the bridge network or the private network.
A place to where I can record my Technical stuff that should be accessible from anywhere. It is mainly technical stuff I find interesting and I suppose it can be looked on as a modern Lab-book.
Wednesday, 16 June 2010
Subscribe to:
Post Comments (Atom)
Defender 300tdi Lucas 10AS Alarm Immobiliser (Spider) Problems
We have a 1997 Landrover Defender 300tdi that has given immobiliser problems intermittently. I had initially fixed the fuel solenoid as we w...
-
Server failure This server failed with the error "E171F PCIE Fatal Err B0 D3 F0" during power up. Upon inspection it was found th...
-
I bricked my MR3220 router with an OpenWRT firmware upload. I did manage to get it back by soldering a 4 pin header on its pcb to allow conn...
-
I make no guarantees for the information contained herein, I also cannot be held responsible for data loss as a result of your actions, we m...
No comments:
Post a Comment