Tuesday, 25 January 2011

Sheevaplug Shenanigans




I was loaned this particular Sheevaplug V1.3 with ESATA by Alex Voss, many thanks Alex. I plan to install a large hard drive and use this to boot the Sheeva plug from and install standard Debian rather than the Ubuntu it is supplied with. It seems to be relatively easy but requires a custom Kernel.
at No comments:
Subscribe to: Posts (Atom)

Defender 300tdi Lucas 10AS Alarm Immobiliser (Spider) Problems

We have a 1997 Landrover Defender 300tdi that has given immobiliser problems intermittently. I had initially fixed the fuel solenoid as we w...

  • Dell Poweredge 2950 Failure
    Server failure This server failed with the error "E171F PCIE Fatal Err B0 D3 F0" during power up. Upon inspection it was found th...
  • TP-Link MR3220 Debricking
    I bricked my MR3220 router with an OpenWRT firmware upload. I did manage to get it back by soldering a 4 pin header on its pcb to allow conn...
  • Use an ATTiny45 to auto-boot a NAS200 on power up
    I make no guarantees for the information contained herein, I also cannot be held responsible for data loss as a result of your actions, we m...