Monday, 22 August 2011

PPC iMac Network Fault

A PPC iMac was brought in and it was found that dhcp was not working (it wasn't receiving an IP address from the server).

It did work if the IP address was set manually. On further investigation it was found from the system logs that all dhcp requests were being denied. So the firewall was modified to allow dhcp requests and this fixed the problem.

No comments:

Post a Comment

CNC 6040 Spindle Control

Note: This is only an on - off control there is no speed control due to limitations on the CNC control box , you set the speed using the pot...